Construction projects need reliable water storage for cleaning, dust control, temporary facilities, landscaping, and other site requirements. In the UAE, Dubai Polymer Industries manufactures polyethylene water tanks in the UAE for construction, commercial, and industrial applications.
Dubai Polymer offers vertical and horizontal tanks in different capacities. Contractors can choose the right tank based on site space and water storage needs.
Choose the Right Tank Capacity
Before selecting a water tank for construction sites,
Consider:
- Daily water consumption
- Number of workers
- Refill frequency
- Tanker delivery schedule
- Project duration
- Backup water requirement
A tank that is too small will require frequent refilling. A tank that is too large may occupy unnecessary space and increase delivery and installation requirements.
Compare the available water tank sizes and specifications before selecting a capacity.
Vertical or Horizontal Water Tank
Before selecting tanks for construction sites, the first thing to consider is the installation space of the tanks. Based on this space, Dubai Polymer provides two types of tanks as follows.
Vertical water tanks
Vertical tanks use only less ground space and are suitable for sites where the installation area is limited.
They are commonly selected for:
- Narrow service areas
- Temporary office areas
- Fixed ground-level installations
- Sites with limited floor space
The total tank height and delivery access must be checked before ordering.
Horizontal water tanks
Horizontal tanks require more ground space than vertical tanks.
They may be more suitable for:
- Open construction sites
- Height-restricted areas
- Ground-level installations
- Locations with wider available space
Check the installation space.
Measure the complete installation and delivery route before placing the order. Also, on construction sites, the outlet and drain connection should be planned based on daily water use, cleaning needs and site access.
Check:
- Available width and length
- Maximum installation height
- Gate width
- Access-road width
- Turning space
- Delivery vehicle access
- Crane access, where required
- Space around the tank
- Clearance for the lid and fittings
The tank should remain accessible for inspection, cleaning, and future replacement.
Prepare a Proper Tank Base
A water tank must be installed on a flat, stable and fully supported surface.
The base should:
- Support the complete bottom of the tank
- Be level
- Be free from sharp objects
- Remain stable when wet
- Be strong enough to support the filled tank
- Prevent water from collecting around the tank
Do not place the tank directly on loose sand, uneven blocks, construction debris, or a base that supports only part of the tank.
Select a Tank Suitable for Outdoor Use
Construction-site tanks are usually installed outdoors and exposed to sunlight, heat and dust.
Dubai Polymer water tanks are manufactured using UV-stabilized polyethylene. Multi-layer and insulated options help to provide additional protection from outdoor conditions.
When choosing a tank, customers should confirm:
- Number of layers
- Tank capacity
- Installation location
- Expected sunlight exposure
- Project duration
- Intended water use
A secure lid and properly protected openings are also important on dusty construction sites.
Check the Tank Material
Before selecting a construction site water tank, check the following:
- Type and quality of polyethylene used
- Number of layers
- UV stabilization
- Suitability for the intended water use
- Tank capacity and dimensions
- Product identification and technical datasheet
- Manufacturer warranty
Dubai Polymer water tanks are manufactured using high-quality polyethylene, a material commonly used for water storage because it is lightweight, corrosion-resistant, and suitable for outdoor installation.
Dubai Polymer uses UV-stabilized polyethylene to help protect the tank body from prolonged sunlight exposure. Multi-layer options are available for projects that require additional protection against heat and light penetration.
Protect the Tank From Damage
Install the water tank away from areas where it may be hit or damaged.
Avoid locations close to:
- Heavy vehicle routes
- Excavation work
- Falling materials
- Welding areas
- Sharp objects
- Chemical storage
- Waste collection areas
- Unstable temporary structures
Where required, place protective barriers around the tank without blocking maintenance access.
Keep the Tank Clean and Secure
Construction sites produce dust and debris, so the tank lid and openings should remain properly closed.
Inspect:
- Tank lid
- Inlet
- Outlet
- Overflow
- Vent
- Internal cleanliness
- Sediment
- Tank base
- Connected pipes
The tank should be cleaned according to the water source, intended use and project requirements.
Potable and non-potable water tanks should be clearly identified to prevent misuse.
Consider future tank relocation.
The position of temporary offices, access roads and storage areas may change during construction.
Before installing the tank, consider whether it may need to be moved later.
Always empty the tank before relocation. Do not drag the tank or lift it using the inlet, outlet or other fittings.
Use suitable handling equipment and follow the manufacturer’s instructions.
Water Tank Checklist for Construction Sites
Before ordering a tank, confirm:
- Required capacity
- Vertical or horizontal shape
- Available installation space
- Delivery access
- Base condition
- Outdoor exposure
- Layer requirements
- Vent requirement
- Pump connection
- Cleaning access
- Vehicle protection
- Future relocation requirements
Why Choose Dubai Polymer?
Dubai Polymer Industries LLC has manufactured plastic products in the UAE since 2003.
Our polyethylene water tank range supports residential, commercial, construction, and industrial requirements.
With manufacturing operations in Ajman, Dubai Polymer supplies water tanks to construction projects across Dubai, Abu Dhabi, Sharjah, Ajman and the other Emirates.
Order Water Tanks for Construction Sites in UAE
Dubai Polymer can help contractors and project teams select a water tank based on the required capacity, available site space and installation conditions.
Explore our complete range of plastic water tanks in UAE or contact Dubai Polymer with your construction-site requirements, required quantity and delivery location.
FAQs
Which tank is better for a construction site: vertical or horizontal?
Vertical tanks are suitable where floor space is limited, while horizontal tanks are useful where height is restricted and more ground space is available.
Can Dubai Polymer water tanks be installed outdoors?
Yes. Dubai Polymer offers UV-stabilized and multi-layer tanks suitable for outdoor installation in UAE conditions.